$0.00 - 0 item(s)

You have no items in your shopping cart.

Monthly Archives: June 2016

  • MOTO STUFF YOUNG GUNS Willy Simons Jr

    Meet MOTO STUFF athlete Willy Simons Jr.

    Fasthouse Local - Willy Simons Jr. from Fasthouse on Vimeo.

    Continue reading

  • Don't let this happen to your YZ 250F!

    Don't let this happen to you! Don't let this happen to you!

    The 2014 Yamaha YZ250F introduced a new lightweight plastic impeller design that is proving to be problematic. Riders are reporting failure at an alarming rate at around the 5 hour point and there has been at least one failure on a stock bike as early as 1.5 hours of race use. This is especially concerning as you won't know that it has failed until it is too late and serious engine damage may have occurred from overheating. Moto Stuff worked with Splitstream to develop this high quality billet steel upgrade that solves the problem for good and is also available (below) in a Hi-Flo version. Install a kit today before it's too late! An upgraded replacement part was sent out to owners under recall summer of 2014, however it s still a plastic part and did not resolve the issue. Shaft life improved somewhat, but owners are still reporting premature failures even with new upgraded part that was introduced on the 2015 YZF 250 and used on the 2016 YZF 250.

    Standard flow kit Upgraded Billet Steel Water pump Shaft & Alloy Impeller (Standard Flow)

    1 x Replacement CNC Machined Steel one piece Water pump Shaft
    1 x CNC Alloy Impeller
    Re-use the stock gasket as they generally are not damaged during removal

    Hi Flow kit: Increased cooling and reduced overheating with the Splitstream Oversized Waterpump Kit . The Splitstream Oversized Waterpump Kit has an oversized high flow impeller and reduces the average temperature 15-20 degrees cooler compared to the stock impeller. All waterpump kits come with a OEM gasket and longer bolts.Oversized Waterpump Kit Including upgraded Billet Steel shaft & Alloy Impeller (Hi-Flow)

    1 x Replacement CNC Machined Steel one piece Water pump Shaft
    1 x Oversized Alloy CNC Machined Impeller
    1 x Blue anodized Spacer to fit the Oversized Alloy CNC Machined Impeller
    4 x Longer Bolts
    2 x Longer Dowel Pins
    1 x OEM Waterpump Gasket (You'll also re-use the stock gasket as they generally are not damaged during removal)

    For more information or to order click here!

    yzf-pump-impeller

    For more information or to order click here!

    splitstream-billet

    For more information or to order click here!

  • Ultimate 2003 Honda CR250 2 stroke build - Motocross Action Magazine

    Always nice to see the MOTO STUFF Blade Braking System and our lightweight body fasteners kits and 60 piece billet aluminum engine fastener kits used in these trick bike builds!

  • Quicker Check Out and Pay After Delivery for eligible MOTO STUFF customers!

    We know- It's not MOTO, but besides providing you with the the latest in Trick Parts for your dirt bike, we also like to eliminate as much hassle as possible from the process of ordering online. Since February 2016​, we've been testing a new payment and checkout service known as​ ​KLARNA.​ ​KLARNA ​simplifies the checkout process online​ ​by allowing you to buy using ​only ​top of the mind information (your email address and zip code).​ ​With KLARNA​,​ we can now provide you with standard merchant checkout and payment using VISA​, ​Mastercard​, ​AM​E​X​, ​Discover​,​ Pay​P​al​, and now Pay After Delivery for eligible customers!
    The short video below explains the KLARNA checkout process. Our goal is to make your MOTO STUFF shopping experience as smooth and quick as possible and KLARNA does a great job of addressing the main pain points of online shopping by eliminating the need to re-enter information or memorize additional passwords!

    How Klarna works - US - mobile from Klarna on Vimeo.

  • MOTO STUFF Riders Featured in RACER-X Article: 250 Words by Steve Matthes- Waiting Game......

    RJ Hampshire. Jordon Smith. Jordon Hampshire. RJ Smith. The two GEICO Honda riders often confused with each other are also linked at the hip under the team’s awning. Their careers have run parallel with each other. Both turned with GEICO Honda around the same time (Hampshire three races at the end of 2014, Smith made his debut the next year), both have front running speed on certain days, they’re both from the same amateur class and most importantly, they both have the potential to be stars in the sport. Both have recently re-signed with the team.

    GEICO Honda is hoping that one, if not both, of them will break out this summer or in 2017 and reward the team for its patience. The funny thing about these two friends is that at one time, they had a bitter rivalry.

    “He didn’t like me at all!” laughs Hampshire. “It was mainly just because, well, I got a GEICO ride in amateurs and we were racing each other full-time. He never beat me once I got the ride. So it wasn’t good until, I think, our first supercross together. But we’re really tight now—every weekend we’re together. We both have the same struggles so we relate to each other pretty well.”

    “It was one of those things where I think it was the first time that GEICO had two amateurs in the same class,” says Smith about the initial “issues” the two had. “We were two guys who were fast, had the same bikes and wanted to go to the same place. It was a competition.”

    On the outside, the similarities are easy to see: both have the ability to go very, very fast at times but have a hard time keeping those results consistent. Both riders have hit the box in 250SX, both riders have led races and have a plethora of top tens to their name.

    Jordon Smith
    Like Hampshire, Smith has shown a ton of speed early in his career, but hasn't figured out the consistency part yet.

    Smith’s capable of reaching another level that Hampshire can’t get to, but he’s got a hard time keeping it on two wheels. Hampshire is steadier and produces more consistent finishes. Both riders have also dealt with injuries. At the Red Bull Straight Rhythm event last year, Hampshire knocked himself out and was a question mark for the Monster Energy Supercross season. He recovered and had a good year.
    Continue reading

  • MOTO STUFF WORKS EDITION Billet 1-Piece NOW IN STOCK!

    In development over the past 6 months, the MOTO STUFF WORKS EDITION Billet 1-Piece Caliper is 18% lighter than the stock cast aluminum NISSIN calipers found on HONDA, KAWASAKI, SUZUKI and YAMAHA MX bikes.
    Billet construction increases rigidity by 28%, which equates to a dramatic reduction in flex for improved consistent response at the lever. HUGE TWIN 30MM billet pistons provide more stopping power with less effort and help reduce arm pump and rider fatigue. The MOTO STUFF Billet 1-Piece Caliper is planned to be available early in August 2016 and will be available for HONDA, KAWASAKI, SUZUKI and YAMAHA MX bikes and it is a great compliment to the MOTO STUFF Blade Braking System! The MOTO STUFF "WORKS EDITION" caliper is ready to bolt on and equipped with premium components including billet sliding pin, Billet Banjo bolt, billet Bleeder cap and AP Racing pads. A true works level caliper at an affordable price! Target price is $475 as a complete ready to bolt on assembly.

    The version above was most popular in polls we did with select customers and Pro Teams we work with. Our first run will be this style and we're planning to offer a couple of color options as well as a custom finished option. We'd love y to hear your feedback on the styles below as we may do something different in the future.  Comment below or send us an e-mail to info at info@motostuff.com

    This version was most popular in polls we did with select customers and Pro Teams we work with. Our first run will be this style and we're planning to offer a couple of color options as well as a custom finished option. We'd love to hear your feedback on the styles as we may do something different in the future. Comment below or send us an e-mail to info at info@motostuff.com


    MOTO STUFF "WORKS EDITION" Billet Caliper MOTO STUFF "WORKS EDITION" Billet Caliper

    BQ caliper 13315709_537953666390805_7616702085587983262_n

    Brett Cue's X-Games Bike Brett Cue's X-Games Bike running the MOTO STUFF Works Edition Caliper

6 Item(s)