$0.00 - 0 item(s)

You have no items in your shopping cart.

Hi Flow with billet impeller shaft and impeller for 2014-2017 YZF 450

More Views

Splitstream Hi Flow Water Pump Kit Yamaha

In stock

Be the first to review this product

Available in Standard flow or high flow for:
YAMAHA YZF 250 2014 - 2018
YAMAHA YZF 450 2014 - 2018

Available in Standard flow or high flow for:


  YAMAHA YZF 250 2014 - 2018


  YAMAHA YZF 450 2014 - 2018


Increased cooling and reduced overheating with the Splitstream Oversized Waterpump Kit . The Splitstream Oversized Waterpump Kit has an oversized high flow impeller and reduces the average temperature 15-20 degrees cooler compared to the stock impeller. All waterpump kits come with a OEM gasket and longer bolts.


The 2014 Yamaha YZ250F introduced a new lightweight plastic impeller design that is proving to be problematic. Riders are reporting failure at an alarming rate at around the 5 hour point and there has been at least one failure on a stock bike as early as 1.5 hours of race use. This is especially concerning as you won't know that it has failed until it is too late and serious engine damage may have occurred from overheating. Moto Stuff worked with Splitstream to develop this high quality billet steel upgrade that solves the problem for good and is also available (below) in a Hi-Flo version. Install a kit today before it's too late! An upgraded replacement part was sent out to owners under recall summer of 2014, however it s still a plastic part and did not resolve the issue. Shaft life improved somewhat, but owners are still reporting premature failures even with new upgraded part that was introduced on the 2015 YZF 250 and used on the 2016 YZF 250.


Standard flow kit Upgraded Billet Steel Water pump Shaft & Alloy Impeller (Standard Flow)


1 x Replacement CNC Machined Steel one piece Water pump Shaft
1 x CNC Alloy Impeller
Re-use the stock gasket as they generally are not damaged during removal


Hi Flow kit: Increased cooling and reduced overheating with the Splitstream Oversized Waterpump Kit . The Splitstream Oversized Waterpump Kit has an oversized high flow impeller and reduces the average temperature 15-20 degrees cooler compared to the stock impeller. All waterpump kits come with a OEM gasket and longer bolts.Oversized Waterpump Kit Including upgraded Billet Steel shaft & Alloy Impeller (Hi-Flow)


1 x Replacement CNC Machined Steel one piece Water pump Shaft
1 x Oversized Alloy CNC Machined Impeller
1 x Blue anodized Spacer to fit the Oversized Alloy CNC Machined Impeller
4 x Longer Bolts
2 x Longer Dowel Pins
1 x OEM Waterpump Gasket (You'll also re-use the stock gasket as they generally are not damaged during removal)


 


 

0 0
$148.00
148
USD

* Required Fields

$148.00

Available in Standard flow or high flow for:

  YAMAHA YZF 250 2014 - 2018

  YAMAHA YZF 450 2014 - 2018

Increased cooling and reduced overheating with the Splitstream Oversized Waterpump Kit . The Splitstream Oversized Waterpump Kit has an oversized high flow impeller and reduces the average temperature 15-20 degrees cooler compared to the stock impeller. All waterpump kits come with a OEM gasket and longer bolts.

The 2014 Yamaha YZ250F introduced a new lightweight plastic impeller design that is proving to be problematic. Riders are reporting failure at an alarming rate at around the 5 hour point and there has been at least one failure on a stock bike as early as 1.5 hours of race use. This is especially concerning as you won't know that it has failed until it is too late and serious engine damage may have occurred from overheating. Moto Stuff worked with Splitstream to develop this high quality billet steel upgrade that solves the problem for good and is also available (below) in a Hi-Flo version. Install a kit today before it's too late! An upgraded replacement part was sent out to owners under recall summer of 2014, however it s still a plastic part and did not resolve the issue. Shaft life improved somewhat, but owners are still reporting premature failures even with new upgraded part that was introduced on the 2015 YZF 250 and used on the 2016 YZF 250.

Standard flow kit Upgraded Billet Steel Water pump Shaft & Alloy Impeller (Standard Flow)

1 x Replacement CNC Machined Steel one piece Water pump Shaft
1 x CNC Alloy Impeller
Re-use the stock gasket as they generally are not damaged during removal

Hi Flow kit: Increased cooling and reduced overheating with the Splitstream Oversized Waterpump Kit . The Splitstream Oversized Waterpump Kit has an oversized high flow impeller and reduces the average temperature 15-20 degrees cooler compared to the stock impeller. All waterpump kits come with a OEM gasket and longer bolts.Oversized Waterpump Kit Including upgraded Billet Steel shaft & Alloy Impeller (Hi-Flow)

1 x Replacement CNC Machined Steel one piece Water pump Shaft
1 x Oversized Alloy CNC Machined Impeller
1 x Blue anodized Spacer to fit the Oversized Alloy CNC Machined Impeller
4 x Longer Bolts
2 x Longer Dowel Pins
1 x OEM Waterpump Gasket (You'll also re-use the stock gasket as they generally are not damaged during removal)

 

 

Use spaces to separate tags. Use single quotes (') for phrases.